Group signals panel

The group signals panel lets you view, on a single screen, the signals (shown in the app as Guntimes) generated by the timing devices in the same export group. A group is usually made up of the devices that send readings to the same race, even if they are placed at different locations.

This article covers the Group guntimes panel in MyTimingsense, available from Devices › Dashboard. The panel shows the time of each signal and the device that generated it. What each signal means depends on what you want to mark with it: a start, a participant passing a point, or any other moment of the event.

1. What is a signal and how is it generated?

A signal is the record created when you press the macro button on the timing device.

This button is on the device's membrane, next to the LEDs. Do not confuse it with the power button. On TS2 and TSOne devices, this function is in the on-screen menu, under the Guntimes option.

You can use a signal to mark, for example:

  • The moment a start or wave begins.
  • The first woman passing kilometer 5.
  • Any other moment you want to record as a reference.
⚠️ Important: MyTimingsense receives the signal and displays it. Generating a signal does not automatically set a start or Guntime in the timing software. If you want to use it as a start time, the timer must perform the corresponding operation in Copernico. In other software, it depends on how that software handles these signals.
ℹ️ Note: signals are not chip readings. A signal appearing in the panel confirms that it reached the cloud, but it does not tell you whether the device is reading chips.

2. What is an export and which devices make up a group?

An export is the configuration that tells a timing device where to send its readings.

Exports are created when you set up the race in Copernico or when you configure TSConnector: each device has at least one export to a location in that race (start, finish, or an intermediate point). You cannot create or delete them from MyTimingsense.

For example, a race might have one device at the start, another at kilometer 5, and another at the finish. Each one sends its readings to its own location.

An export group usually brings together the devices that point to locations in the same race. The panel lets you view the signals from all of those devices without opening them one by one, sorted from newest to oldest.

To learn more, see the article What is an "export"?.

ℹ️ Note: if you only need to view the signals from a single device, you can use its public page. See the article Public device page (Guntimes).

3. Where to find it

  1. Open MyTimingsense and go to Devices › Dashboard.
  2. Find the group you want to view.
  3. Click Guntimes, next to the group name and its number of devices.

Dashboard with the group Guntimes button highlighted

The Group guntimes side panel opens. Clicking this button does not collapse the group. To exit, use the close button at the top right of the panel.

The Help button (the ? icon next to the panel title) opens a guided tour of the panel. It becomes available once the group's first data has loaded.

ℹ️ Note: the button and the panel are called Guntimes, but they show every signal generated by the devices, regardless of what you chose to mark with them.
ℹ️ Note: if a group does not have this button, it usually corresponds to exports with no consumer (Copernico or TSConnector) or no race ID, so the group cannot be viewed as a whole. This is expected, not a fault.

4. What the panel shows

Group guntimes panel

4.1. Header

At the top you will find:

  • Group and the number of devices (for example, "3 devices"): these identify the devices whose signals you are viewing.
  • Guntimes from … to …: the period being queried. It is set by the group's exports and runs up to the present moment; you do not choose it.
  • Newest page / History: shows whether you are viewing only the first (newest) page or have also loaded earlier pages.
  • Live connection status:
    • Live feed connected: new signals arrive in real time.
    • Connecting…: the connection is being established.
    • Live feed disconnected: the live connection has been lost. New signals will not appear on their own until it is restored.
    • Live feed not available here: there is no live connection in this environment. In this case, the Last received block is not shown.
ℹ️ Note: the Newest page / History label and the connection status are independent: viewing history does not mean the connection has been lost.

4.2. Last received

The Last received block shows the most recent signal received live, with its time, when it reached the cloud, and the device that generated it. It covers the whole group, even if you have filtered the list by device.

Until the first one arrives, you will see the message "Connected and waiting — no detection has arrived yet." In this panel, it means that no live signal has been received yet. If the connection is lost, the block keeps showing the last signal received.

4.3. Signals table

Column Description
Wave time The time associated with the signal.
Received in cloud How long ago the signal reached the cloud. Hover over it (or click it) to see the exact date and time it was received.
Device column The device that generated the signal.
ℹ️ Note: the time of the signal and the moment the cloud receives it may differ.

5. Times: local time or UTC

The Local time / UTC switch at the top of the panel lets you choose how times are displayed. The panel opens in your local time.

This setting applies to every time in the panel: the table, the period being queried, and the Last received block.

6. Live signals

New signals appear automatically at the top of the list as they arrive. You do not need to click Update.

This keeps working even if you load older signals: the label changes to History because you have added earlier pages, but new signals keep arriving at the top as long as the live connection is active (Live feed connected).

7. Filter by device

The All devices drop-down above the list lets you show only the signals from the devices you select.

The filter works on the signals already loaded and does not download any more. When you clear it, all of the group's loaded signals are shown again.

ℹ️ Note: if a device appears as a code instead of a name, its identifier is being shown. This happens when the device is not in your device list, for example, if it was deleted after exporting data.

8. Load more and update

  • Load more guntimes, at the bottom of the list, shows the next batch of earlier signals. Next to it you can see how many have been loaded (for example, "120 guntimes loaded"). When there are no more in the period being queried, the button is replaced by the text "Everything in the window is loaded".
  • Update (circular arrow icon, at the top right) returns to the newest page and removes from view any earlier batches you have loaded. It does not delete any signals.

Earlier signals are only loaded when you click Load more guntimes. The counter only includes the signals loaded with this button: it does not count signals that arrive live, and it ignores the device filter. Relative receipt text, such as "2 minutes ago", updates automatically.

⚠️ Important: if Load more guntimes fails, the signals already on screen are kept. You will see the warning "Could not load more guntimes" with a Start over button, which reloads from the newest page.

9. Sharing the group's signals

The Public page button at the top of the panel opens this group's signals on a page of their own, in a new tab. That page does not require you to sign in: copy its address from your browser's address bar and send it to whoever needs to follow the group, even if they do not have a MyTimingsense account.

Anyone who opens the link sees the same list of the group's signals, with new ones arriving live, and nothing else: not your devices, not your company, not the rest of the app.

Group guntimes panel with the Public page button highlighted

⚠️ Important: the page has no password and no other check: anyone who has the address can open it. Share it only with the people you choose, and do not post it on open sites, web pages or social media.

10. If no signals appear

Depending on the situation, the panel shows one of these messages:

Message What it means and what to do
"This group hasn't started collecting yet" The group's exports are scheduled to start later. Nothing is broken.
"No guntimes have been recorded in this group's export window" There are no signals in the period being queried. If you were expecting some, check that they were generated with the macro button or from the Guntimes option, and review the device's transmission and exports.
"No guntimes match the selected devices" The filter is hiding the signals. Clear or change the selected devices.
"No export matches this consumer and id" There is no active export for that group. Check in Copernico or TSConnector that the race still has exports configured.
"This group has no start date" The group's exports have no start date, so the period cannot be queried. Review the export configuration in Copernico or TSConnector.
"Guntimes could not be loaded" Communication with the service failed. Click Update to try again.
ℹ️ Note: no signals does not mean the device has stopped reading chips. If nobody has generated a signal, the panel can be empty even though the device is timing normally.

11. Related articles

With this panel, you can view the signals from all the timing devices in the group on a single screen and see which device generated each one.

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.