This article explains how to enable the video replay functionality for a race in Copernico.
ℹ️ Note: Video replay availability depends on both the race configuration and the control points where video capture is required.
Contents
1. Requirements to enable video replay
To make video replay available in a race, the following requirements must be met:
- Live mode must be enabled for the race.
- The control points must have the Video-repeat option enabled.
2. Enable Live mode
The first step is to make sure that Live mode is enabled for the race:
- Inside the race in Copernico, go to Plugins and select the Live plugin.
- Click Enable LIVE service.
See Live activation for the full process.
⚠️ Important: If Live mode is not enabled, video replay will not be available.
3. Configure video replay at control points
Once Live mode is enabled, configure the control points where video replay will be captured.
Steps:
- In the race's LIVE Config, go to the event's Timing Points list.
- Select the desired control point.
- Enable the Video-repeat option.
This setting allows replay footage to be displayed at that specific point of the race. The recording is made by a phone with the Copernico Video app installed.
Comments
Article is closed for comments.