Tag sequencing is the correlation between bibs and tags: which tag number corresponds to each bib.
You can configure a range of bibs and their corresponding tag range. Bibs and tags in the sequencing must be numeric.
Every time you change the sequencing, participants are updated. If you imported a participant with a tag already assigned, that tag is not changed.
In each participant’s panel, the Automatic tag assignment option (selected by default if the race has sequencing) assigns the tag from the bib; clear it to type the tag manually. More information in Add participant manually.
There are two ways to sequence tags in Copernico:
The end of the article explains how to remove sequencings.
1. Automatic sequencing from Copernico
- In the side menu, click Race setup and open the Chips sequencing tab (microchip icon).
- Enter the range of bibs of your race in the Bib range fields, for example from 1 to 5,000.
- The Tag range fields are automatically filled in with the same values. Change them only if necessary.
- Choose the event in the Event drop-down. If all race bibs are for the same event, you can leave the All value, which appears preselected.
- Click ADD.
- Click the page’s save button (SAVE). The ranges you add are not applied until you save. The message “Tags successfully saved!” appears.
If you use two tags per bib in your race, you can create a new sequencing range with ADD. Complete the same values for the bib range, put in the tag range corresponding to the second tag of each bib, and save.
You can check the sequencing in the Preview drop-down. The chart shows, for each bib (horizontal axis) and each event, how many sequencing ranges cover it. With one tag per bib, the line must be continuous with a maximum of 1; with two tags per bib, 2. Ranges assigned to all events (All) count in the line of every event.
2. Sequencing from a file
For this type of sequencing, prepare a file without headers with two columns, bib and tag, or with three, first bib, last bib and offset. In that case, each bib’s tag is the bib plus the offset: for example, “1,500,1000” assigns tags 1001 to 1500 to bibs 1 to 500. In the three-column format, do not use an offset of 0, because the row is read as a two-column row. The file can be .txt or .csv.
- In the side menu, click Race setup and open the Chips sequencing tab (microchip icon).
- Click the import icon (cloud icon; on hover it shows Import tags via file).
- Drag the file you have already prepared or click to find it on your computer.
- When the file is loaded, choose the event in the Event drop-down to assign it to the list; if there is only one event, you can keep the All preselection. If needed, change the delimiter (comma by default; also semicolon, tab or colon) and the encoding (UTF-8 or ISO-8859-1). Below, you will see a preview of the ranges read.
- Click Save. The sequencing is saved immediately.
The sequencings which you have loaded in your file will appear on the screen.
3. Removing tag sequencings
You can delete sequencings one by one with the bin icon, or several at once: select them (the header check box selects all) and choose Remove selected in the ⋮ menu. Then click the page’s save button (SAVE) to apply the deletion.
Video transcript
00:03 Let’s see how to associate tags to participants in Copernico. This is one of the most difficult mistakes to solve if we don’t know what data belongs to which tag, and it can make the day of a race a nightmare. The first thing we have to be clear about is that there cannot be two participants with the same tag code in the same event. There are several ways to associate tags to participants, and everyone has a preferred way of doing so.
00:40 The first way is uploading a CSV file that contains the participant data and contains the tag codes associated with them. The second way is importing the participant data and then separately importing the tag codes. And the last way is you can import the participant data, but then you can manually associate the tags with the participants here under tag sequencing in Copernico [today, sequencing is no longer a menu: it is a tab of Race setup]. So let’s start with the first method. Here we have our participant data, and you can see that two of my columns are bib and tag, associated with each of the participants. Make sure to download it as a CSV.
01:18 So now we’re going to import participants. Select the file that we need, switch to comma, UTF or whatever your file requires, and here we associate the fields from my document. Let’s just make sure it’s all correct. Everything looks good; save. Event and wave: this depends on your previous race setup, so I’m just going to keep mine and press save. And now you can see that my participants were imported, and here we have the bib and the tag.
02:20 The last way to make the tag association in Copernico is you import the participant data as we did before, and we do not have the code information. But instead of uploading a file, I’m going to go to tag sequencing [today, a tab of Race setup] and I’m going to enter the numbers manually. So, as I said before, I have bib range 1 to 20, and then my tag code range will be 1001 to 1020. Just simply press add, save [the ranges are only applied when you click Save], and you’ll see back in participants that they’ve been associated correctly. But the second way to associate tags and participants in Copernico is by uploading the participant data and then having a separate file uploaded under tag sequencing with the tag sequencing data.
03:03 So we’re going to start the same as before, where we import the participants’ information, except this time my CSV file does not contain the tag sequencing information. So, same procedure. Okay, so now my participants were imported, but this time there is no tag sequencing data. So I’m going to go to tag sequencing and import file. Here I have my tag sequences that I’ve decided to upload; save, and you can see the table. The file looks just like this: it’s just my sequencing of tags and the bib number. So after clicking save, you can go back to participants,
04:06 and you can see the tags that I did sequence. I did not add all of the values: I wanted to show you that it sequences and associates the ones that you entered.
Comments
Please sign in to leave a comment.