💡The timing devices appear automatically in TSConnector, under the TimingPoint you have set, when you make a remote connection through the cloud, as long as you have previously configured the devices. If not, you can connect them locally, as long as the devices and the computer from which you are using TSConnector are connected to the same network.
You have two options to add a device to a TimingPoint from TSConnector.
Option 1
- Click the Discovery icon, in the top right-hand corner. On the screen you will see all of the devices currently connected to the local network.

- Click the blue button to the right of the device you want to connect.

- Fill in the IP address of the device.
- Choose the TimingPoint to which you want to add this device.
- Click Add and accept by clicking the green checkmark that appears on the screen.

Option 2
- Click the + icon of the TimingPoint where you want to add the device.

- Fill in the IP address of the device.
- Check that the TimingPoint you want to add this device to is correct.
- Click Add and accept by clicking the green checkmark that appears on the screen.

The device will now be assigned to the TimingPoint correctly in the start screen. If the connection is correct, the sidebar of the TimingPoint will display in green.

Comments
Please sign in to leave a comment.