đź’ˇThe timing devices appear automatically in TSConnector, under the TimingPoint you have set, when you make a remote connection through the cloud, as long as you have previously configured the boxes. If not, you can connect them locally, as long as the boxes and the computer from which you are using TSConnector are connected to the same network.
You have two options to add a box to a TimingPoint from TSConnector.
Option 1
- Click on the “Discovery” icon, in the top right-hand corner. On the screen you will see all of the boxes currently connected to the local network.
- Click the blue button to the right of the box you want to connect.
- Fill in the IP address of the box.
- Choose the TimingPoint to which you want to add this box.
- Click on “Add” and accept by clicking on the green checkmark.
Option 2
- Click on the “+” icon of the TimingPoint where you want to add the box.
- Fill in the IP address of the box.
- Check that the timing point you want to add this box to is correct.
- Click on “Add” and accept by clicking on the green checkmark.
The box will now be assigned to the TimingPoint correctly in the start screen. If the connection is correct, the sidebar of the TimingPoint will display in green.
Comments
Please sign in to leave a comment.